Ricoh MD-P2 Field Service Manual page 142

5. System Maintenance Reference
5856 002 Local Port
5857 [Debug Log Save]
5857 001 ON/ OFF
5
5857 002 Target
5857 005 Save to HDD
5857 006 Save to SD Card
5857 009 HDD to SD Latest
5857 010 HDD to SD Any
5857 011 Erase HDD Debug
5857 012 Erase SD Debug
5857 013 Dsply-SD Space
5857 014 SD to SD Latest
5857 015 SD to SD Any
140
Allows the technician to update the firmware
using a parallel cable.
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
Enables Or Disables The Debug Log Saving
Function.
*CTL
[0 or 1 / 0 / 1/Step] Alphanumeric
0: OFF, 1: ON
Sets the storage location for the debug log.
*CTL [2 or 3 / 2 / 1/step]
2: HDD, 3: SD
*CTL Sets the key number of the debug log.
*CTL Sets the key number of the debug log.
Copies the most recent 4 MB of the debug log
*CTL
from the hard disk to the SD card.
Sets the key number of the debug log copied from
*CTL
the hard disk to the SD card.
*CTL Deletes the debug log from the hard disk.
*CTL Deletes the debug log from the SD card.
*CTL Shows the free space on the SD card.
Copies the most recent 4 MB of the debug log
*CTL
from an SD card to a different SD card.
Sets the key number of the debug log copied from
*CTL
an SD card to a different SD card.