Ricoh MD-P2 Field Service Manual page 137

5844 006 PnP Serial Number
5844 100 Notify Unsupport
5845 [Delivery Srv] Delivery Server Setting
5845 003 DeliErr DisplTime
5845 004 Delivery Options
5845 022 Instant Trans Off
• The machine will continue to transmit over the network, even if the network settings
are incorrect. (This causes multiple errors, of course.)
• With this SP off, the machine will stop communicating with the network if the
settings are wrong. This reduces the amount of spurious network traffic caused by
errors due to incorrect settings.
5846 [UCS Setting]
LDAP Search TOut
5846 010
Sets the length of the timeout for the search of the LDAP server.
AddtB Acl Info
This SP must be executed immediately after installation of an HDD unit in a basic
machine that previously had no HDD. The first time the machine is powered on with the
5846 041
new HDD installed, the system automatically takes the address book from the NVRAM
and writes it onto the new HDD. However, the new address book on the HDD can be
accessed only by the system administrator at this stage. Executing this SP by the service
technician immediately after power on grants full address book access to all users.
Specifies the retry interval.
*CTL
[60 to 900 / 300 / 1 second/step]
Specifies the maximum number of retries.
*CTL
[0 to 99 / 3 / 1/step]
Switches instant transmission off/on.
[0 or 1 / 1 / -]
1: Off. Instant transmission not possible with
*CTL
network setting errors.
0: On. Instant transmission possible with network
setting errors.
*CTL [1 to 255 / 60 / 1 /step]
*CTL
Main SP Tables: 1
5
135