Ricoh MD-P2 Field Service Manual page 277

5507 080 Toner Call Timing
5507 128 Interval: Others
5507 133 Interval: A4
5507 134 Interval: A5
5507 142 Interval: B5
5507 164 Interval: LG
5507 166 Interval: LT
5507 172 Interval: HLT
The alert is sent to the e-mail address that is specified for the system administrator using
a browser and the built-in web server (Web Image Monitor).
When SP5-866-001 is set to "1", this SP is enabled.
[SC/Alarm Setting]
5515
Turns on or off the following SC alarm settings. These SP's are active when the CSS or
NRS is enabled.
5515 001 SC Call
5515 002 Service Parts Ne
5515 003 Service Parts En
5515 004 User Call
5515 006 Communication Te
5515 007 Machine Infomat
5515 008 Alarm Notice
Enables or disables the toner supply alarm.
*CTL [0 or 1 / 0 / -]
0: Toner end, 1: Toner near end
*CTL
*CTL
Sets the paper supply alarm level. A paper supply
*CTL
alarm counter increases by +1 when a sheet of the
related size is used. The paper supply alarm occurs
*CTL
when one of the paper supply alarm counters gets
to the set value.
*CTL
[250 to 10000 / 1000 / 1/step]
*CTL
*CTL
*CTL [0 or 1 / 1 / - ] 0: OFF, 1: ON
This SP activates the service parts near end call.
*CTL
[0 or 1 / 0 / - ] 0: OFF, 1: ON
This SP activates the service parts end call.
*CTL
[0 or 1 / 0 / - ] 0: OFF, 1: ON
*CTL [0 or 1 / 1 / - ] 0: OFF, 1: ON
This SP activates the communication test call.
*CTL
[0 or 1 / 1 / - ] 0: OFF, 1: ON
This SP activates the machine information call.
*CTL
[0 or 1 / 1 / - ] 0: OFF, 1: ON
*CTL [0 or 1 / 0 / - ] 0: OFF, 1: ON
Engine SP5-xxx
3
45