System Requirements; Known Issues With Em Exadata Plug-In - Oracle SuperCluster T5-8 Owner's Manual

System Requirements

Only systems with software Version 1.1 (or later) with Database Domain on Control LDOM-
only environments are supported. Earlier versions of the system can be made compatible if you
update to the October 2012 QMU release. You can confirm this requirement by looking at the
version of the compmon pkg installed on the system (using either pkg info compmon or pkg
list compmon commands to check). You must have the following minimum version of compmon
installed: pkg://exa-family/system/platform/exadata/compmon@0.5.11,5.11-0.1.0.11:
20120726T024158Z
With the Oracle SuperCluster software version 2.x, the compmon command name changed
Note -
to osc-compmon. Use the new name if SuperCluster is installed with the Oracle SuperCluster
v2.x release bundle. See

Known Issues With EM Exadata Plug-in

The pre-requisite check script exadataDiscoveryPreCheck.pl that is bundled in
■
Exadata plug-in 12.1.0.3 does not support the catalog.xml file. Download the latest
exadataDiscoveryPreCheck.pl file from My Oracle Support as described in the
"Discovery Precheck Script" section of the
Oracle Enterprise Manager Exadata Management Getting Started Guide (http://docs.
oracle.com/cd/E24628_01/doc.121/e27442/title.htm)
If multiple database clusters share the same Exadata Storage server, in one Enterprise
■
Manager management server environment, you can discover and monitor the first DB
Machine target and all its components. However, for additional DB Machine targets sharing
the same Exadata Storage server, the Oracle Exadata Storage Server Grid system and the
Oracle Database Exadata Storage Server System will have no Exadata Storage server
members because they are already monitored.
If the perfquery command installed in the system has version 1.5.8 or later, you will
■
encounter a bug (ID 15919339) where most columns in the HCA Port Errors metric in the
host targets for the compute nodes will be blank. If there are errors occurring on the HCA
ports, it will not be reported in Enterprise Manager.
To check your version, run the following command:
perfquery -V
"Identify the Version of SuperCluster Software" on page
Monitoring the System Using EM Exadata Plug-in
Monitoring the System
145.
227