Safety Precautions - Vision Max Pro User Manual

8 Vision Max Pro User Manual
1.2

Safety Precautions

Keep hands clear of the bottom of the spindle during operation.
There are no user serviceable parts inside the machine. Please contact qualified service personnel
for service issues.
Openings are provided in the machine's base for ventilation. Do not cover the openings or place the
machine in an environment where the openings may become blocked.
Never insert anything into the ventilation openings. Doing so may create a danger of electric shock.
Do not expose the equipment to rain or use it near water. You can clean the machine with a damp
cloth, but be sure to disconnect the power cord.
Always stop the machine before making any adjustments.
Do not operate the equipment with any covers removed.
Wear safety glasses when cutting any materials that emit chips.
Use extreme caution when inserting or removing cutters.
Before any servicing, disconnect the power cord.
To avoid electric shock or equipment damage, ensure that the equipment is connected to the
appropriate electrical source as noted in the installation procedures.
Never operate the equipment with damaged or frayed power cords, loose connections, or exposed
extension cords where the cord could create a tripping hazard.
Be sure to hold the plug, not the cord, when disconnecting the equipment from an electrical socket or
power source.
Place the equipment in a location with low humidity and a minimum of dust. Avoid placing the
equipment in direct sunlight or in locations with excessive heat. Follow the maintenance instructions
for proper cleaning of the controller air filter.
If your equipment does not operate properly; in particular, if there are any unusual sounds or smells
coming from it, immediately unplug it and contact a service technician or your local distributor.
Unplug the machine when it is going to be left unused for an extended period of time.
© 2015 Vision Engraving Systems