Safety Precautions - Vision 1612 User Manual

Safety Precautions

for Vision Engraving Tables
Keep hands clear of the spindle belt during operation.
Keep hands clear of the bottom of the spindle during operation.
Always stop the machine before making any adjustments.
Unlplug the power to the Vision controller and disconnect the table cable and
spindle drive cable before servicing.
Do not operate the system with covers removed.
Wear safety glasses when cutting any materials that emit chips. Use of the optional vacuum
system will help remove chips.
Use extreme caution when inserting or removing cutters, as cutter surfaces are very sharp.
Safety
Page 5