Part Iii Operation; General Description And Terminology - Vision Max Pro User Manual

Software Installation and Connections 39
3 Operation
3.1

General Description and Terminology

The following is a list of features and a description of the components for the Max Pro Engraver.
1. Spindle Cover - This cover has a magnetic latch and opens from the left side. Pull the cover to
access the spindle, drive belt and diamond drag ring adapter.
2. Top Cover - This cover is secured by 4 screws and can be removed to access the X and Y axis
motors, bearings and leadscrews for maintenance.
3. T-Slot Table - The table is secured to the Rotary Vise via 4 screws. It is used to when engraving most
flat items.
4. Rotary Vise - The Rotary Vise can be used bot to rotate cylindrical items as well as hold, or clamp,
odd shaped items. The left side of the vise is the drive side, powered by the rotary axis motor. The right
side is "free-wheeling". Adjustment of the vise can either be performed by manually rotating the
adjustment wheel, or via the Vise Motor controlled by the Pendant.
5. Water Catch Tray and Return Line - When using the water feed pump on certain applications, water
is collected by the catch tray and is returned to the water reservoir via the return line.
6. Vise Angle Locking Handle - The rotary vise can be tilted counter-clockwise approximately 30
degrees to accommodate tapered items. Turning the handle counter-clockwise unlocks the vise. Turning
the handle clock-wise locks the vise. The vise cannot be tilted clock-wise.
7. Vise Motor - This motor powers the vise leadscrew via the pendant. The vise can be quickly be
opened or closed using this motor.
© 2015 Vision Engraving Systems