Using A Network Hub - Only - Vision Max Pro User Manual

22 Vision Max Pro User Manual
2.2.3

Using a Network Hub - ONLY

Connection from PC to Hub or Router to Machine or Controller
Once the machine is connected to a hub or router, and the hub or router is connected to your
computer's network port, turn the machine on. The power switch for the Max Pro is located on the left
rear of the machine's base. Once the machine has initialized, plug the supplied Vision USB drive into
an available USB port on your computer.
NOTE - This installation is performed on a Windows 7 PC. For Windows XP, Windows 8, Windows 8.1
or Windows 10, the screens are slightly different.
The computer will recognize the USB drive
Select Open folder to view files.
and the following screen will appear.
Select Continue without scanning.
© 2015 Vision Engraving Systems