Network Connection - Vision Max Pro User Manual

Software Installation and Connections 19
2.2.2

Network Connection

Connecting via Standard Network Cable to Network
Once the machine is connected to your network, turn the machine on. The power switch for the Max
Pro is located on the left rear of the machine's base. Once the machine has initialized, plug the
supplied Vision USB drive into an available USB port on your computer.
NOTE - This installation is performed on a Windows 7 PC. For Windows XP, Windows 8, Windows 8.1
or Windows 10, the screens are slightly different.
The computer will recognize the USB drive
Select Open folder to view files.
and the following screen will appear.
Select Continue without scanning.
© 2015 Vision Engraving Systems