Part Iv Example Jobs; Level 1 Jobs - Using The T-Slot Table - Vision Max Pro User Manual

76 Vision Max Pro User Manual
4 Example Jobs
In the following sections, there are 10 example jobs which can used to learn the different ways to
operate the Vision engraver or router. The jobs are separated into three levels; Level 1, Level 2 and
Level 3. Level 1 contains files that provide instructions on the most common uses of the engraver or
router, and utilizes Vision 9 Express software for job creation. Level 2 includes more advanced
applications and may require features only available in Vision 9 Expert or Pro software. Level 3 uses
Vision 9 Expert or Pro software and provides examples of advanced jobs.
The sections and example jobs are designed to incrementally teach the user how to operate their
machine, as well as utilize some of the common functions within the Vision software. It is recommended
that the first time user read through these sections and practice the techniques discussed in the order
they are presented.
4.1

Level 1 Jobs - Using the T-Slot Table

These first set of example jobs cover the basics of engraving and cutting. The basic machine functions
and software setup are discussed. By the last of these examples, the user should be well acquainted
with the machine and Vision software.
In these first set of jobs, the T-Slot Table is installed on the machine. To install the T-Slot Table, first,
insert the 4 locating pins into the holes on the top of the rotary vise.
© 2015 Vision Engraving Systems