Vision Max Pro User Manual page 127

Example Jobs 127
Once the color of all objects is the same, select only the clipart, then select Arrange Break Path,
then select Arrange Make Path. This resets the fill path so that when we use the Hatch Fill tool, the
correct parts of our clipart object will be filled.
Hatch Fills
For Vision Express, select the Stroke and Fill Tools (or ) icon from the left toolbar, and click on the
Hatch Fill (or Fill tool) tool.
The top menu bar will change to the Hatch Fill toolbar in Vision Express only. (For Vision Expert or Pro,
see below). Since we are using a 0.015 Flex Cutter for this example, we need to change the Tool width
setting to about 25% less than the cutter tip width. In this case, the Tool Width was set to 0.012 inches,
the Fill angels was left as 0 degrees, the S sweep patter was used (it is faster than the line sweep
pattern) and the color was set to black. Once these settings have been changed, click on Close to exit
the Hatch Fill toolbar.
© 2015 Vision Engraving Systems