Vision Max Pro User Manual page 122

122 Vision Max Pro User Manual
We now import clipart to add style to the sign. To import the file, select File Import from the top menu
bar. This will open the Import File window. The file we are importing is BORD0117 and is located in the
C:\Vision Express 9\ClipArt\BORDER folder. Select the file, then click on Import. Click inside the plate
area to finish importing the file.
Change the size to 1.5 inches wide by 0.651 high and change the position to 3.00 inches X and 1.25
inches Y as shown, using the top toolbar fields. Make sure the center "Nub" is selected when positioning
graphics using center coordinates.
© 2015 Vision Engraving Systems