Vision Max Pro User Manual page 128

128 Vision Max Pro User Manual
For Vision Expert or Pro, select the Tool Path Tools, then select the Fill icon.
The Fill window will appear. Select the .015 Engraver as the Tool. Set the Depth to 0.015 inches (or
whatever the cap layer thickness is for the material you're using). The Color can be any one you
choose, in this case, Red was chosen. For this graphic, the Gap was set to -0.005 inches to increase
detail slightly. Choose the Fill style, such as S-Sweep and set the Fill overlap to about 25% for plastics.
More overlap will make for a cleaner engraving, but take more time. In this example, the Fill angle was
set to 0. There are many parameters to modify in this Fill dialogue. The user should get familiar with
these parameters and experiment to determine which setting are preferred for the job being performed.
Once these settings have been entered, select the icon to the right of the depth text entry field.
© 2015 Vision Engraving Systems