Part Vii Optional Accessories; Vacuum Chip Removal System - Vision Max Pro User Manual

176 Vision Max Pro User Manual
7 Optional Accessories
These accessories are available for purchase directly from Vision, or you local distributor, as well as
through www.visionengravers.com. If you have any questions about these accessories, please contact
Vision or your distributor for advice for choosing the best accessories for your applications. Vision can
also help if you have a need for special fixtures, or modifications to our standard accessories. Please
call us for details.
7.1

Vacuum Chip Removal System

Processing plastics, acrylics, sign foam and wood, produces a significant amount of debris that can
clog the nose cone and/or get trapped between the nose cone and the material, which will cause
engraving/cutting depth inconsistencies, potentially scratch the surface of the material and cause
overheating in the spindle area. The vacuum chip removal system is designed to simplify the engraving
process and minimize wear and tear on the engraver. It uses a vacuum nose cone to remove chips
created during the engraving process before they have the chance to create problems. The quiet pump,
coupled with the micro-fine layered filters, assures that your unwanted chips are whisked away
effortlessly. The vacuum pump canister uses replaceable/reusable filters to assure maximum efficiency
and cost-effectiveness. This vacuum chip removal system is available with or without a Vision vacuum
nose cone.
The Optional Vacuum Chip Removal System
© 2015 Vision Engraving Systems