Vision Max Pro User Manual page 85

Example Jobs 85
Next, the material should be placed on the engraving table, with the upper left corner of the material
positioned in the home position (upper left corner of the engraving table). Note that the Multi Mat material
has been placed on the t-slot table in order to hold the engraving material in place.
Select the Engrave icon from the left toolbar.
The Cut Toolbox will appear and the options for engraving will appear on the top toolbar.
Verify the Device chosen is for your machine, then open the Tool Setup window by clicking on the icon
shown below (which is to the right of the Tools drop down list).
© 2015 Vision Engraving Systems