Basic Operation; Power On And Power Off The Product; Focus; Laser Pointer - Fluke VT08-II User Manual

Visual ir thermometer
Table of Contents

Advertisement

5. On the submenu, push
6. To change and view settings on the submenu, refer to the
7. Push the Trigger to close a menu or submenu and return to live Camera mode.

Basic Operation

Power On and Power Off the Product

Before you use the Product for the first time, charge the battery. See
To power on the Product, push and hold
To power off the Product, push and hold
All thermal Meters need sufficient warm-up time for accurate temperature measurements
and best image quality. Warm-up time can vary by model and environmental conditions.
Although most Meters are fully warmed up in 3 minutes to 5 minutes, wait a minimum of
10 minutes if the most accurate temperature measurement is important to your
application. When you move a Meter between environments with large differences in
ambient temperature, allow for additional adjustment time.
If the Product crashes, push and hold

Focus

The VT06/VT08/VT08-II thermometer is a focus-free product, which means that users do not
need to do anything after receiving it. The Product can ensure that the image is clearly set within
0.5 m and 1.2 m.

Laser Pointer

The Meter has a laser pointer. The laser pointer is a sighting aid and is offset from the infrared
camera. As a result, the laser dot does not always represent the exact center of the image.
The laser dot does not appear on infrared-only or PIP images. The laser dot does appear on
visible-only images. You will not be able to see the laser dot in the visible channel of the PIP image
if the dot is obscured by the center point marker graphic.
Pull the Trigger to turn on the laser pointer and release the Trigger to turn off the laser pointer.

Camera mode

The VT08/VT08-II Meter has the infrared, visible light, and PIP Camera modes, as shown in
Figure
1. The VT06 Meter has only infrared mode.
P
to return to the previous menu.
P
P
Note
Note
P
Gallery
for 2 seconds.
for 2 seconds.
for 3 seconds to power off the Product.
Visual IR Thermometer
Basic Operation
and
Camera Info
sections.
Charge
Batteries.
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vt08Vt06

Table of Contents