Units Settings; Rotor Settings - Adash 4400 VA4 Pro User Manual

ADASH Ltd.
Blades the number of blades ( for rotors with blades). This parameter is used in job figuring to split the
mass to blades.
Meas Mode single, online meter
be taken (single) or the continual measurement values displayed (online meter). In online meter
mode you can look at more values and to evaluate the changing of them in time. You need to
STOP the measurement, when is displayed the value, which you want to use.
Avg the averaging of more then one measured values is available
Resolution read the explanation in the Meas functions/ New Advanced section.

Units Settings

Amplitude selection from available units for used sensor
Detect Type RMS, 0-P, P-P
Speed selection from available units for speed
Mass selection of unit for mass

Rotor Settings

Rotor mass rotor mass in kg
Trial radius radius to which the balancing mass will be mounted
Balance Quality Grade
All parameters are optional. It enables to calculate balancing quality factor according ISO1940.
For further technical and contact information visit www.adash.eu, email: info@adash.cz
when you push the Start button, then only one measurement value can
the value, which is defined by rotor type according ISO1940
68
Adash 4400 – VA4Pro