Table of Contents
Advertisement
ADASH Ltd.
Adash 4400 – VA4Pro
The Main screen
After switch-on the Main screen appears. You can select the required mode of the unit.
Update of the unit firmware
You can download the updated firmware from producer website www.adash.cz. Follow the procedure:
- Download the file for update ( e.g. A4400_ver0202.up2) from website (www.adash.cz) and save it to your
computer.
- Connect the instrument to the computer. Remember, it has to be switched off.
- Run the Explorer or other software, which you use for copy of files.
- Copy the update file from the computer to the VA4_DISC.
- Use Safely remove hardware function and disconnect instrument from the computer.
- Switch-on the instrument to the main screen.
- Push the Update button.
- Select the required update file from the list ( more version files can be saved in the instrument). Press OK.
- The main screen window is closed now. The procedure of update is described in the new command window.
- After the update the main screen appears again.
Update of bearing database
The bearing database you can download from website Adash/ Downloads/ Software Adash. The Bearing
Database item is in A4400 - VA4Pro section. The name of the file is bdx01.va4.
- Connect the instrument to the computer. Remember, it has to be switched off.
- Run the Explorer or other software, which you use for copy of files.
- Copy the update file from the computer to the VA4_DISC.
- Use Safely remove hardware function and disconnect instrument from the computer.
- Switch-on the instrument to the main screen. Bearing database is ready to use.
31
For further technical and contact information visit www.adash.eu, email: info@adash.cz
Advertisement
Table of Contents
