ADASH Ltd.
ALARMS
Standards setup, Alert limits (yellow colour) and Danger (red colour) will be defined. See Standards for
vibration measurements chapter.
Chosen standard is displayed above the machine symbol (F13 in this case). If Adash standard is
chosen, nothing is displayed.
MEASURE
This item contains the settings of measurements.
MEASURE - UNITS
To change the UNITS, go to SETUP menu and then MEASURE menu.
Vibration speed unit can be chosen here. mm/s (millimetres per second) for Metric units and ips (inch
per second) for Imperial units are available. Device remembers chosen units even after switch off.
Further technical and contact information can be found at www.adash.com
38
Adash 4900 – Vibrio M