Reference Values - Adash 4400 VA4 Pro User Manual

ADASH Ltd. Adash 4400 – VA4Pro
When you press the Start button in the points list, the measurement graphs are drawn with the No_Data
message. If the required sensor (defined in the route) is not compatible with the sensor connected to channel
input (Sensors properties) instrument warns us about this. In this case change the sensor or use the different
sensitivity and press Continue.
Press the START to begin the point measurement. All defined measurement will be taken together.
The complete point measurement should be taken now. The measured data are or are not displayed on the
screen regarding the Display Route Values parameter in Global Settings.
Use the Back to return back to points list. The measured point is labeled by the symbol √ (all defined
measurement were taken) or by the cross (some measurements were not taken due to error).

Reference values

You can download reference values from DDS to VA4Pro unit for spectrum and overall measurements. These
values are displayed together with measured values.
Reference spectrum is displayed together with measured spectrum in the same graph.
Overall reference value is displayed in left side of graph and it is signed by "R:" or like a line in trend view.
84
For further technical and contact information visit www.adash.eu, email: info@adash.cz