Table of Contents
Advertisement
ADASH Ltd.
Adash 4400 – VA4Pro
General information
The switch-on
Use the POWER button for switch-on (older versions had the button in different position as in the picture).
The green LED on the front panel ( right at the top) lights after switch-on.
The switch off
The switching off can be done by:
- Power Off button on the main screen,
- in the Global menu is the Power Off item available.
Auto switch off
If no button is pushed in 5 minutes from switching on, the unit will be switched off.
The emergency switch off
This is not correct method to switch off the instrument. Using it can cause data corruption. Use this method only
in case of emergency (eg. when the system freezes).
Push and hold the POWER button for about 5 seconds. Instrument will switch off.
Disc free capacity warning
If this warning message appears, you need to get free disc space by removing the measurements, routes or
records, which are not actual.
10
For further technical and contact information visit www.adash.eu, email: info@adash.cz
Advertisement
Table of Contents
