Adash 4400 VA4 Pro User Manual page 93

ADASH Ltd. Adash 4400 – VA4Pro
During the analyzing of record the cursor is displayed in the record preview. The moving of cursor is available
and it enables to select the required position for analyses.
When you need to move the cursor then you have to select the record area ( to move the red border to the
record). There are two ways how to do it:
Analyzer, Route and RunUp modes - use the Arrow Mode button repetitively until the red border is on the
record.
The rest of the modules - use the Record button to select and de-select the record.
Also the selection of record channel is available for preview (the record can contain more channels then one).
Also the DC channels or speed channel can be used for navigation. When the record is selected, use the Select
Ch. arrows in the right top of display. Sound of selected channel is also on audio output.
93
For further technical and contact information visit www.adash.eu, email: info@adash.cz