New Meas Creation; New Basic - Adash 4400 VA4 Pro User Manual

ADASH Ltd. Adash 4400 – VA4Pro
Enter the name, push OK. The project list appears (alphabetical order).
The L2 letter after the name is the Level 2 type indication.
Open the Project by OK.
The empty list of L1 items appears. Press L1 button and select New. Enter the name of new Level 1 item.
The L1 list appears.
Open the L1 item and create the Set in the same way as it the previous section.
Use the Back and Close Project buttons to return to the Project list.

New Meas creation

Select the set from Set list of selected Project and press OK. Press the Meas button and select New Basic or
New Advanced.

New Basic

You can create the new Meas by two ways. When you want define some basic measurement use the New
Basic. Select required measurement from the list. This way is very fast.
38
For further technical and contact information visit www.adash.eu, email: info@adash.cz