How To Work With Menu; Item Selection; User Defined Values - Adash 4400 VA4 Pro User Manual

Vibration analyzer

Table of Contents

ADASH Ltd.

Adash 4400 – VA4Pro

How to work with Menu

For the taking of measurements you have to define many parameters. All those definitions are providing by

menu items. The procedure for operation with all menu items is the same. We describe it on example - the

sensor properties definition.

The sensor properties first menu appears after you push the Sensors button.

Use the arrow buttons for one item selection, e.g. AC2. Then push OK button. The second menu appears.

Again use the arrow button for one item selection. Then push the right arrow button to display possible

parameters of selected item. E.g. for Sensitivity you see this picture:

Again use the arrow button for one sensitivity selection (1,10,100). In most of cases you want to enter the user

sensitivity according to the real sensor sensitivity of your sensor (e.g. 96,8 mV/g). Select the user and push OK.

The next window appears and the buttons get the numerical values entry functions.

For further technical and contact information visit www.adash.eu, email: info@adash.cz

Table of Contents