Profiles; Signal Source - Adash 4400 VA4 Pro User Manual

ADASH Ltd. Adash 4400 – VA4Pro
Now we describe how to create the User notes list. Press the Global button and select User Notes Settings.
The new window appears. In upper half is the list of existed user notes (now empty). The predefined Factory
notes are displayed in lower half.
Because usually the user wants to use only the User notes, you can copy any factory note to the user notes.
Select it by arrows and press Select button.
If you want to create your own note, then push Edit text button. Enter your note manually. Press the Save
button and all notes are saved to memory.

Profiles

All instrument parameters can be saved to the Profile. It is useful e.g. for saving of sensor sensitivities.
Save settings to name saves the parameters to the Profile, which was opened.
Save settings as new profile save the parameters to the new Profile (after name entry).
Factory opens the factory default Profile
list of saved profiles (acc_sensors, proximity_sensors) selection of existed profile
The Delete button removes selected profile.

Signal Source

Every measurement can be taken from LIVE channels ( AC 1-4 or DC 1-4 ) or from RECORD ( see Recorder
chapter for understanding). All records saved in the memory are displayed for selection. Select required item
and press OK button. The selected signal source is also displayed in the Global window.
29
For further technical and contact information visit www.adash.eu, email: info@adash.cz