Note Edit; Export To Va4_Disc; Download Of The Route To The Computer - Adash 4400 VA4 Pro User Manual

ADASH Ltd. Adash 4400 – VA4Pro
- If you want to enter your own text, then press Edit Text button. The cursor appears in upper area and you can
enter the required note. Press Notes List (the same button position as Edit Text) to return back to the selection
of User/Factory note.
If the note is done, press Save button. You return back to the list of all notes for selected point.
Press OK to leave the list of notes. The N letter appears behind the point name.

Note edit

Select the note from the list and press Edit button. Then use the same procedures as for new note for editing.
To delete the selected note press Delete.
Press OK to leave the list of notes. The N letter appears behind the point name.

Export to VA4_DISC

The computer can read any data from VA4_DISC only. The route with measured data has to be exported to this
memory before the transfer. During the route measurement are data saved to the VA4 hard disc only. When the
route is closed the VA4 asks the user "Export to VA4_DISC?" and user selects one option. The export to
VA4_DISC is not done automatically because the writing procedure to flash is slow. The large route export can
take several minutes. That is why the user can determine, when the right moment to export the route is.
In the menu item Route/ Export you can select the route and export it manually.

Download of the route to the computer

The process is the same as the load of route to the instrument. In VA4Pro instrument window use the
Receive button and select the required route from the list ( all routes saved in the VA4_DISC). The list of all
87
For further technical and contact information visit www.adash.eu, email: info@adash.cz