Table of Contents
Advertisement
ADASH Ltd.
When the measurement from disc are displayed, (View Trend function), then the additional Trend item
appears.
According selected function two right top buttons change their meaning.
Functions for up and down arrows (top right buttons):
Select - moves the selection of active graph
Position - you can change the order of graphs
Zoom - makes zoom-in or zoom-out on vertical Y axe
Move - when the zoom-in is applied, then button move with the signal in defined zoom view vertically
Functions for left and right arrows:
Zoom - makes zoom-in or zoom-out functions on X or Y axe
Move - when the zoom-in is applied, then buttons move with the signal in defined zoom
Delta X - defines the delta X resolution for sideband or delta cursor
Trend - moves on the displayed measurement from disc (history).
The Start, OK button
This right middle button has more purposes and it can :
START the measurement,
OK confirm the selections or entries.
The Stop, Cancel, Back and Close button
This left middle button has more purposes and it can :
STOP the measurement,
Cancel the definition or selection in menu items,
Back moves back in structure of project
Close closes the measurement screen and returns you to the project list
Graph Max/Min
Maximizes or minimizes the selected graph to the whole screen or returns back to the initial screen with more
graphs.
Graph Properties
The list of properties is displayed for properties selection. The scale ranges and types (lin, log,...) definitions are
the typical use.
!!! Important notice: All available values will be described for every item. But these all values are not visible
always. During your work are always displayed only values/choices, which give sense at that moment.
E.g. the Axe Z (third) axe is only visible in 3D graphs (e.g.cascade, spectrograph).
Display
value, trend
When value is used, then last measurement value is displayed (default setting).
When trend is used, the measured values are displayed in the trend.
Scale
max
auto
For further technical and contact information visit www.adash.eu, email: info@adash.cz
Y autoscale for every new graph, but the range is increased when higher value comes
Y autoscale according data values of every new measurement
46
Adash 4400 – VA4Pro
Advertisement
Table of Contents
