Table of Contents
Advertisement
ADASH Ltd.
Adash 4400 – VA4Pro
View Trend/ View Actual
The switch button for displaying of last measured data (Actual) and data saved in memory (Trend).
The View Trend example. The trends of overall values is in two top graphs. The cascade graph contains several
spectra.
Clear Last Data
if the trend is displayed, then it deletes last measured data in measurement point or set
(according of displayed data).
Enter speed
This function are available by pushing the bottom left button. This button can have various names depending of
mode (Analyzer, Route) and displayed screen (Project, Machine, Set, Point, Meas).
The manual entered speed value will be saved to all next readings. It is saved to the same position in the head
of data as the speed measured by tacho. If the speed is manually entered and also measured by tacho, then the
tacho has priority and it is saved.
The manually entered speed is displayed on the right side at the top of the screen with the word "Speed:"
You should notice, that the speed value is saved to the head of data. That is why you have to use the Tacho
factor ( Machine or Point Properties) in DDS for recalculation of speed to other ratios.
The Gear Ratio (in Properties) is used with Default Speed value not with the speed value in data head. The
Default speed is defined by user in Properties. It is used with machines, which have constant speed (always the
same value).
Cancel speed
It cancels (removes) manually entered speed value.
The Cancel speed function is also available in Route.
Measurement Definition in the Set
As has been described already the Set contains definitions of measurements (Meas), which we want to take
together.
43
For further technical and contact information visit www.adash.eu, email: info@adash.cz
Advertisement
Table of Contents
