Basic Control; Basic Menu - Adash A4900 Vibrio M Pocket Manual

Basic control

Arrow buttons
>
switch between the measurement modes
>
select the right or left item from the menu at the bottom
>
move between items (up/down) in menu
Enter button
>
switches the instrument on/off
>
confirmes the selection
>
selects the middle item from the menu at the bottom
>
opens the menu
Battery status
Volume
Press the left
Arrow button
to select this
option (ESC)
Enter button
6
Moving signal indicates
running measurement
Time
Press the right
Arrow button
to select this
option (REP)
Arrow buttons

Basic menu

1. To open the Menu press
the Enter button (on any
measurement screen)
2. Then press the left Arrow
button to open the Menu
3. You can select the following items from the menu:
>
Light
to switch on the torch or the stroboscope
(see page 11)
>
Memory
for route measurement
(see page 12 - 13)
>
Setup
setup of speed, alarms, units, time, etc.
(see page 14)
>
Volume
for headphones volume setup
(see page 15)
>
-Esc-
back to the measurement screen
7