General Information; A4300 Va3 Pro - General Information And Configuration; Switching On; Battery - Adash 4300 VA3Pro User Manual

ADASH Ltd. Adash 4300 – VA3Pro

General information

A4300 VA3 Pro – general information and configuration
The A4300 VA3 Pro is a data collector and an analyzer for vibration diagnostics.
There are 2 signal inputs and 1 tacho/trigger input. Input 2 offers connectivity to a triaxial sensor, therefore all 3
channels can be measured simultaneously. The expert system developed by Adash can automatically detect
machine faults such as unbalance, looseness, misalignment and bearing faults.
There is a non-contact IR temperature sensor (for immediate bearing temperature measurement) and a LED
stroboscope/torch. The A4300 VA3 Pro is designed for one-handed operation. With a weight of just 780g and a
battery life of more than 10 hours of operation, the unit is suitable for long route measurements.
The A4300 VA3 Pro instrument can be configured according to your requirements by choosing optional
modes e.g. analyzer, route, balancer. Optional modules can be purchased also additionally and
downloaded to the instrument without the need of sending it back to the factory.
At the moment there are 8 modes available. The modes FASIT (Expert system), Stroboscope and Meter
are included in every unit.
The modes: Analyzer, Route, Balancer, Recorder and Run Up are optional and it is up to you if you wish
to have them in your A4300 VA3 Pro.

Switching on

Use the POWER button to switch-on the device.
Push and hold the button until the right hand LED on the front panel (top right) changes colour from orange to
green.

Battery

The information about % of battery lifetime is displayed on the top right corner of the display. When the battery
is charged more than 25% the battery symbol is green. When the battery is charged 5-25%, the yellow symbol
is used. Under 5%, the red symbol appears.

Switching off

Switching off can be done on the instrument's main screen. Press the POWER button and confirm by pressing
Yes.
9
For further technical and contact information visit www.adash.com, email: info@adash.cz