Beckman Coulter EPICS XL-MCL Troubleshooting Manual page 55

6. Slide the new sample head onto the
sample probe and up into the head
seat with the tubing facing the back.
7. Install the test tube guide using the
two Allen screws from step 2.
8. Record that the manual sample head
was replaced on the QC
Mainenance screen. See Appendix B
for instructions.
PN 4237296CA
REPLACE/ADJUST PROCEDURES
REPLACING THE MANUAL SAMPLE HEAD
SAMPLE
PROBE
SAMPLE
HEAD
7027120C
7027122C
2
2-17