Keithley 6487 Reference Manual page 266

Model 6487 Reference Manual
Table C-1 (cont.)
Device dependent command summary
Mode Command
C0
C1
Zero
Check
C2
Da
Display
Text
D
F0
Ohms
F1
G0
G1
G2
G3
G4
Data
Format
G5
G6
G7
Equivalent SCPI or 488.2 commands
Disable Zero Check
SYSTem:ZCHeck OFF
Enable Zero Check
SYSTem:ZCHeck ON
Enable Zero Check and perform Zero Correct
SYSTem:ZCHeck ON
SYSTem:ZCORrect ON
Display ASCII text message up to 12 characters
DISPlay:TEXT <string>
DISPlay:TEXT:STATe ON
Cancel display text mode (return to normal display)
DISPlay:TEXT:STATe OFF
Disable ohms
[SENSe[1]]:OHMS OFF
Enable ohms
[SENSe[1]]:OHMS ON
ASCII readings with prefix (NDCA-1.23456E-02)
ASCII readings without prefix (-1.23456E-02)
ASCII readings with prefix and buffer suffix (if in B1 or B2,
NDCA-1.23456E-02,012)
ASCII readings without prefix and buffer suffix (if in B1 or
B2, -1.23456E-02,012)
Binary readings, IEEE-754 std., single-precision, byte order
reversed.
FORMat:DATA SREal
FORMat:BORDer SWAPped
Binary readings, IEEE-754 std., single-precision, normal
byte order.
FORMat:DATA SREal
FORMat:BORDer NORMal
Binary readings with exponent, byte order reversed (not sup-
ported)
Binary readings with exponent, normal byte order
(not supported)
Description
DDC Emulation Commands
Note
B
SCPI not
available See
FORMat
subsystem.
C
C
C-3
Default
X
X
X
X