Table of Contents
Advertisement
Model 6487 Reference Manual
Table 14-4 (cont.)
SENSe command summary
Command
[:DAMPing]
:OHMS
[:STATe] <b>
[:STATe]?
:AVOLtage
[:ARM]
[:ARM]?
:ABORt
:VOLTage <NRf>
:VOLTage?
:TIME <NRf>
:TIME?
:POINts?
:ONEShot <b>
:ONEShot?
:CYCLes <NRf>
:CYCLes?
:UNITs <name>
:UNITs?
:CLEar
:AUTO <b>
:AUTO?
:BCOunt?
*15s for 1 PLC or greater, 1s for 0.1 PLC, and 0.1s for 0.02 PLC.
Description
Path to control ohms:
Enable or disable ohms for SENSe1 data.
Query ohms SENSe1 data state.
Path to A-V ohms commands:
Arm A-V ohms mode.
Query if A-V ohms is armed.
(1 = armed).
Abort A-V ohms mode.
Set high voltage value (-505 to 505V).
Query high voltage value.
Set time interval for each phase.
Query time interval for each phase.
Query number of points.
Enable or disable one-shot mode.
Query state of one-shot mode.
Set number of A-V cycles (1 to 9999).
Query number of A-V cycles.
Select AMPS or OHMS units.
Query units.
Clear A-V ohms buffer.
Enable/disable A-V buffer auto clear.
Query auto clear state.
Query number of A-V cycles that have
been completed and are averaged to make
up present buffer.
SCPI Reference Tables
Default
Ref.
parameter
Section SCPI
3
OFF
3
10V
15s*
ON
3
AMPS
ON
14-9
Advertisement
Table of Contents
