Keithley 6487 Reference Manual page 212

14-8 SCPI Reference Tables
Table 14-4 (cont.)
SENSe command summary
Command
[:SENSe[1]]
[:CURRent[:DC]]
:RANGe
[:UPPer] <NRf>
[:UPPer]?
:AUTO <b>
:AUTO?
:ULIMit <NRf>
:ULIMit?
:LLIMit <NRf>
:LLIMit?
:AVERage
:TCONtrol <name>
:TCONtrol?
:COUNt <n>
:COUNt?
[:STATe] <b>
[:STATe]?
:MEDian
:RANK <NRf>
:RANK?
[:STATe] <b>
[:STATe]?
:DAMPing
[:STATe] <b>
[:STATe]?
[:SENSe[1]]
Note: *RST default is ON and SYSTem:PRESet default is OFF.
Description
Configure measurement range:
Select range: -0.021 to 0.021 (amps).
Query range value.
Enable or disable autorange.
Query state of autorange.
Select autorange upper limit: -0.021 to
0.021 (amps).
Query upper limit for autorange.
Select autorange lower limit: -0.021 to
0.021 (amps).
Query lower limit for autorange.
Path to control the Digital Filter:
Select filter control: MOVing or REPeat.
Query filter control.
Specify filter count: 2 to 100.
Query filter count.
Enable or disable digital filter.
Query state of digital filter.
Path to control median filter:
Specify "n" for rank: 1 to 5 (rank = 2n+1).
Query rank.
Enable or disable median filter.
Query state of median filter.
Path to control analog filter damping:
Enable or disable analog filter damping.
Query filter damping state.
Model 6487 Reference Manual
Default Ref.
parameter Section SCPI
4
2.1e-4
(see Note)
2.1e-2
2.1e-9
4
MOV
10
OFF
4
1
OFF
4
ON
√
√
√
√
√