Keithley 6487 Reference Manual page 117

Model 6487 Reference Manual
Table 7-2 (cont.)
Trigger model menu structure
- HALT
- ARM
- - ARM-IN
- - - IMM
- - - GPIB
- - - TIMER
- - - MAN
- - - TLINK
- - - - TLINK
- - - - EVENT
- - - /STEST
- - - STEST
- - - BSTEST
- - ARM-OUT
- - - LINE
- - - - TLINK
- - - EVENT
- - - - T - L - DONE
- - COUNT
- - - INF
- - - FIN
klqb
Menu
Stops triggering. Press TRIG to resume.
Path to ARM layer submenus.
Input trigger and output triggers cannot share the same trigger link line.
Defaults set line 1 as the input and line 2 as the output.
Description
Path to ARM-IN control source.
Set control source to IMMediate.
Set control source to GPIB.
Set control source to TIMER. Set timer from
0.001S to 27H, 46M, and 39.992S.
Set control source to MANual.
Set control source to TLINK.
Set TLINK value: 1–6.
Enable (set to ONCE) or disable (set to NEVER).
Set control to negative pulse on SOT line
Set control to positive pulse on SOT line
Set control to positive or negative pulse on SOT line
(Section 8).
Path to ARM-OUT trigger.
Set the output trigger link line.
Set trigger link value: 1–6.
Set Trigger Layer Done event.
Enable/disable Trigger Layer Done (on / off).
Set ARM measure count.
Specify an INFinite measure count.
Specify a FINite measure count: 1–2048.
Triggering 7-9
(Section 8).
(Section 8).