Keithley 6487 Reference Manual page 222

14-18 SCPI Reference Tables
Table 14-9
TRIGger command summary
Command
:INITiate
[:IMMediate]
:ABORt
:ARM[:SEQuence[1]]
[:LAYer[1]]
:SOURce <name>
:SOURce?
:COUNt <n>
:COUNt?
:TIMer <n>
:TIMer?
[:TCONfigure]
:DIRection <name>
:DIRection?
[:ASYNchronous]
:ILINe <NRf>
:ILINe?
:OLINe <NRf>
:OLINe?
:OUTPut <name>
:OUTPut?
1.
*RST default is 1. SYST:PRES default is INF.
Description
Path to initiate measurement cycle(s):
Initiate one trigger cycle.
Reset trigger system (goes to idle state).
Path to configure arm layer:
Select control source: IMMediate, TIMer,
BUS, TLINk, MANual, PSTest, NSTest, or
BSTest.
Query arm control source.
Set measure count: 1 to 2048 or INF (infinite).
Query measure count.
Set timer interval: 0.001 to 99999.999 (sec).
Query timer interval.
Enable (SOURce) or disable (ACCeptor)
bypass.
Query arm source bypass.
Configure input/output triggers:
Select input trigger line: 1, 2, 3, 4, 5, or 6.
Query input trigger line.
Select output trigger line: 1, 2, 3, 4, 5, or 6.
Query output trigger line.
Output trigger (TRIGger) or not at all
(NONE).
Query output trigger status.
Model 6487 Reference Manual
Default Ref
parameter Section SCPI
7
IMM
1
1
0.100
ACC
1
2
NONE
√
√
√
√
√
√
√
√
√
√
√
√
√