Pc/Mc/Dc Upgrade Installation - Respironics BiPAP Vision Service Manual

Obsolete kit
Fuse, 100-120 V, 3.5 A
(P/N 1000749)
MCS board (P/N 582140)
OM assembly,
French (P/N 582254)
Spanish (P/N 582255)
Italian (P/N 1003547)
German (P/N 582220)
PAV/T option kit (P/N 1000747)
Power line filter (P/N 1000745)
Pressure airflow subsystem (PAS)
board (P/N 582146)
Touch pad
French (P/N 582257)
Spanish (P/N 582256)
8.3 Upgrade
PC/MC/DC
Installation
1062788
Table 8-2: Obsolete Repair Kits
Substitution repair kit
Fuse, 100-120 V, 4.0 A (P/N 1041196)
If current fan muffler is labeled with 3.5-A rating, also
install 4.0-A rating circulation fan muffler
(P/N 1041193).
MC upgrade kit, non-PAV (P/N 1004713)
MC upgrade kit, PAV (P/N 1000356)
OM assembly, international (P/N 1004977)
EPROM kit with PAV for s/n 105999 and below not
previously upgraded (P/N 1003254)
AC inlet (P/N 582138)
PC upgrade kit, non-PAV (P/N 1004714GL)
PC upgrade kit, PAV (P/N 104707GL)
Touch pad, international (P/N 1004712)
This section describes how to install these upgrades for ventilator s/n 105999
and below:
• PC/MC/DC three-board upgrade, PAV (P/N 104707GL)
• PC/MC/DC three-board upgrade, non-PAV (P/N 1004714GL)
CAUTION: Perform this repair according to proper ESD guidelines.
NOTE: Record the total operating hours to enter onto the ventilator when the
upgrade is complete.
Required equipment:
• Ribbon cable, test (P/N 1004699)
• Test cable (P/N 582161)
• Test cable (P/N 1004823)
BiPAP Vision Service Manual © Respironics, Inc.
Chapter 8
Options and Upgrades
8-11