Respironics BiPAP Vision Service Manual page 159

1062788
6. Use the extraction tool to remove the existing EPROM (Figure 8-2
shows the EPROM location on the board) and store in an antistatic
container if required.
Figure 8-2: PC Board EPROM Location
7. Carefully install the new PC EPROM, aligning the flat edges of the
EPROM and the socket.
BiPAP Vision Service Manual © Respironics, Inc.
Chapter 8
Options and Upgrades
PC EPROM
Ventilator s/n 105999 and below,
not upgraded
PC EPROM
Ventilator s/n 106000 and above
8-3