Troubleshooting Check Vent Error Codes - Respironics BiPAP Vision Service Manual

6.4 Troubleshooting
Check Vent Error
Codes
1062788
This flow chart (Figure 6-2) summarizes the troubleshooting sequence to
follow if the Check Vent indicator lights.
Select Monitoring > Options > Error
Messages: the error at the top of the
list is the Check Vent code.
See troubleshooting information on
Check Vent error codes (Table 6-3).
Remove top enclosure and ensure
that all connections are secure and
subsystems are correctly installed.
Verify that problem is corrected.
Perform applicable testing and
calibration (Chapter 7).
Figure 6-2: Check Vent Troubleshooting Flow Chart
BiPAP Vision Service Manual © Respironics, Inc.
Check Vent indicator lights,
audible alarm sounds.
Perform corrective action
for the error code.
Chapter 6
Troubleshooting
6-11