System Final Test - Respironics BiPAP Vision Service Manual

7.7 System Final Test

1062788
The system final test verifies that the ventilator operates to specifications. This
test check the accuracy of sensor measurements, pressures, and flow rates in
various operating modes. The system final test also tests user controls and
alarm functions. Table 7-5 summarizes the major components of the system
final test procedure.
Table 7-5: System Final Test Procedures
Procedure
System final test setup
Power indicator and LCD controls test
Pressure accuracy test
Flow accuracy test
Dynamic pressure regulation test
S/T mode performance test
Options and controls
Alarms test
Oxygen module (OM) test
PAV/T mode test (if installed)
Earth resistance and leakage current
Nurse call/remote alarm test (if applicable)
BiPAP Vision Service Manual © Respironics, Inc.
Chapter 7
Testing and Calibration
Description
Section 7.7.1
Section 7.7.2
Section 7.7.3
Section 7.7.4
Section 7.7.5
Section 7.7.6
Section 7.7.7
Section 7.7.8
Section 7.7.9
Section 7.7.10
Section 7.7.11
Section 7.7.12
7-21