Specifications; Generic Specifications; Power Supply Specifications - Mitsubishi MELSEC-F FX3U Series User Manual

FX /FX Series PLC User's Manual - Analog Control Edition
3U 3UC
FX -4AD (4-channel Analog Input)
3UC
2.

Specifications

This chapter describes the general, power supply, and performance specifications for 4AD.
2.1

Generic Specifications

Item
Ambient
temperature
Relative
humidity
Vibration
resistance
Shock
resistance
Noise
resistance
Dielectric
withstand
voltage
Insulation
resistance
Grounding
Working
atmosphere
Working
altitude
*1.
PLC
Independent grounding
Best condition
*2. If the pressure is higher than the atmospheric pressure, do not use 4AD. 4AD may malfunction.
2.2

Power Supply Specifications

Item
A/D conversion
circuit drive power
CPU drive power
B-6
0 to 55°C (32 to 131°F) when operating and -25 to 75°C (-4 to 158°F) when stored
5 to 95%RH (no condensation) when operating
Compliant with EN 68-2-6
Frequency
(Hz)
10 - 57
DIN Rail Mounting
57 - 150
Compliant with EN 68-2-27
2
(147 m/s Acceleration, Action time: 11ms, 3 times by half-sine pulse in each direction X, Y, and Z)
Using noise simulator of:
Noise voltage: 1,000Vp-p / Noise width: 1µs / Rise: 1ns / Cycle: 30 to 100Hz
500 V AC, for 1 min
5MΩ or more using 500V DC
insulation resistance meter
Class D grounding (grounding resistance: 100 Ω or less)
<Common grounding with a heavy electrical system is not allowed.>
Free from corrosive or flammable gas and excessive conductive dusts
Compliant with IEC61131-2 (<2000m)
Another
PLC
equipment
Shared grounding
Good condition
→ For a detailed description of the grounding, refer to Section 3.4.
24V DC ±10%, 80mA
(It is necessary to supply 24V DC from the power connector.)
5V DC, 100mA
(Since the internal power is supplied from the main unit, it is not necessary to supply the power.)

Specifications

Acceleration
2
(m/s )
-
4.9
(Between analog input terminal and each terminal of PLC main unit)
Comply with JEM-1201
(Between batch of all terminals and ground terminal)
Comply with JEM-1201
*2
Another Another
PLC
equipment equipment
Common grounding
Not allowed
Specifications
2 Specifications

2.1 Generic Specifications

Half amplitude
10 times of testing in
(mm)
each direction (X-, Y-,
and Z-axis directions)
0.035
(Total: 80 min, each)
-
*1