Before You Begin; Install Pci Express Host Card - Magma EB4-1U User Manual

M A G M A

Before you Begin

The dual 250W AC power supplies are auto-switching. This means that
it will automatically switch to match whatever source power you are
using. Since all products ship with a US/Canadian Standard 125V
power cord, you will need to use a locally available power cord for non-
US Standard power sources.

Install PCI Express Host Card

Begin the installation of your PCI Express (PCIe) host card by first
powering down your computer. Use the procedures for shutting down
your operating system and shutting off power to your system provided in
your owner's manual or system documentation.
After the host computer is off and all power cords disconnected, remove
the cover and insert the PCI Express host card into a vacant x8+ PCIe
slot by gently pushing the card until it is firmly seated. Notice that the
PCI Express slots are located at a greater distance from the edge of the
computer's mother-board than are the standard PCI slots. Then secure
the card to the slot with a mounting screw.
4 Chapter 2 Hardware Installation