Removing The Stack Tray Lower Limit Switch - Canon Staple Finisher-H1 Service Manual

4
Parts Replacement and Cleaning Procedure > Switches > Removing the Stack Tray Lower Limit Switch

Removing the Stack Tray Lower Limit Switch

1) Remove the front cover. 2) Remove the screw and disconnect the 2 connectors, and then remove the stack
(Refer to page 4-7) tray lower limit switch.
CAUTION:
When attaching the stack tray lower switch, check that the boss of the side
plate is in the hole on the switch.
4 Parts Replacement and Cleaning Procedure > Switches > Removing the Stack Tray Lower Limit Switch
x1
x2
F-4-54
F-4-53
4-24
4-24