Removing The Upper Feed Guide Unit - Canon Staple Finisher-H1 Service Manual

4
Parts Replacement and Cleaning Procedure > External / Internal Covers > Removing the Upper Feed Guide Unit

Removing the Upper Feed Guide Unit

1) Remove the front and 2) Open the paper delivery guide, holding it by the front tab. Then remove the 3
rear covers. screws.
(Refer to page 4-7)
3) Remove the 3 screws and disconnect the connector from the rearward, and then loosen the screw [A]
of the belt tensioner to remove the belt. Then remove the upper feed guide unit.
x3
x1
4 Parts Replacement and Cleaning Procedure > External / Internal Covers > Removing the Upper Feed Guide Unit
x3
A
F-4-15
F-4-16
4-8
4-8