Download Print this page

Basic Operation; Outline - Canon Staple Finisher-H1 Service Manual

Hide thumbs

Advertisement

2
Technology > Basic Operation > Outline

Basic Operation

Outline

Basic operations of this finisher are described below.
(1) The paper delivered from the host machine is fed by the inlet roller, feed roller, and
delivery roller.
(2) The paper delivered by the delivery roller is stacked on the processing tray by the
paddle. A paddle and a paper return paddle are used to align paper in the feed direction.
If two or more sheets with a length of 150 mm or more are stacked, the tray auxiliary
guides slide out.
Paddle
Stack Tray Paper Retainer
2
Technology > Basic Operation > Outline
Feed Roller
Inlet Roller
Delivery Roller
F-2-3
Paper Return Paddle
F-2-4
(3) The alignment plates are used to align paper in the width direction. (In the illustration
below, paper is aligned with reference to the central reference position.)
Rear Alignment Plate
Front Alignment Plate
(4) The operations described in (1) to (3) are repeated for each sheet to be stacked on the
processing tray.
(5) The stacked sheets are stapled (only in the staple mode).
2-4
F-2-5
F-2-6
2-4

Hide quick links:

Advertisement

loading