Connecting To Host Machine - Canon Staple Finisher-H1 Service Manual

Connecting to Host Machine

Caution:
Hold the finisher by its sides indicated in the illustration.
1) Make sure that the left edge of the finisher aligns along the rear side of the output
paper area, and then slowly push the finisher into the host machine.
6
Installation > Installation Procedure > Connecting to Host Machine
F-6-10
F-6-11
6 Installation > Installation Procedure > Connecting to Host Machine
NOTE:
Push the finisher until it clicks into place.
6-5
F-6-12
6-5