Staple Operation; Stack Delivery Operation - Canon Staple Finisher-H1 Service Manual

2
Technology > Processing Tray Unit > Stack Delivery Operation

Staple Operation

When the staple mode is selected, paper is stapled by the stapler after it has been stacked
on the processing tray and aligned.
The stapler is provided at the front of the finisher. Paper is stapled at only one position at the
front.
A maximum of 50 sheets can be stapled.
2 Technology > Processing Tray Unit > Stack Delivery Operation

Stack Delivery Operation

The paper stacked on the processing tray is delivered to the stack tray by the gripper after
being shifted and stapled.
The gripper is driven by the gripper motor (M7) via the gripper drive belt.
The home position of the gripper is detected by the gripper HP sensor (S7).
Stapler
Paper
F-2-31
Gripper HP Sensor (S7)
Gripper Drive Belt
Gripper Motor
2-16
Gripper
M7
F-2-32
2-16