Work Of Service; When Replacing The Parts; Periodical Servicing; Upgrading - Canon Staple Finisher-H1 Service Manual
Advertisement
2
Technology > Work of Service > Upgrading
Work of Service
When replacing the parts
When you have replaced the finisher controller PCB with the service parts, check that the
firmware is the latest version. If it is not the latest version, upgrade it.
Periodical Servicing
This finisher has no periodic service items.
Upgrading
When upgrading the firmware of the finisher controller PCB, upgrade from the host machine.
(Refer to the service manual for the host machine as to the detail.)
2
Technology > Work of Service > Upgrading
2-24
2-24
- Quick Links:
- Detaching the Finisher from the Host...
Hide quick links:
Advertisement
