Download Print this page

Processing Tray Unit; Outline - Canon Staple Finisher-H1 Service Manual

Hide thumbs

Advertisement

2
Technology > Processing Tray Unit > Outline

Processing Tray Unit

Outline

The processing tray unit aligns, shifts, and staples the delivered paper, and then delivers the
paper onto the stack tray using a gripper.
Names and roles of the components of the processing tray are as follows:
Paddle
Front Alignment Plate
M4
Front Alignment
Motor
Paper Return
Paddle
Stapler
Tray Auxiliary Guide
2
Technology > Processing Tray Unit > Outline
Rear Alignment Plate
Paddle
M3
Motor
M5
Rear Alignment
Motor
M2
Delivery
Motor
Paper Return
Stopper
Paddle
Gripper
Tray Auxiliary Guide
M7
Gripper Motor
M6
Tray Auxiliary Guide Motor
F-2-10
No.
Name
[1]
Paddle
Stacks the paper delivered from the delivery roller on the
processing tray.
[2]
Paper Return Paddle
Presses the paper stacked on the processing tray against
the stopper (alignment in the feed direction) and prevents
the previously stacked paper from being fed/delivered.
[3]
Front / Rear Alignment
Aligns the paper stacked on the processing tray in the width
Plate
direction and shifts the paper.
[4]
Gripper
Grips the paper stack on the processing tray, and then
delivers it to the stack tray.
[5]
Tray Auxiliary Guide
When two or more sheets with a length of 150 mm or
more are stacked on the processing tray unit, prevents
misalignment of paper due to curl.
[6]
Stopper
Allows the paper stacked on the processing tray to be
pressed against itself to align the paper in the feed direction.
[7]
Stapler
Staples sheets of paper.
2-7
Function
T-2-3
2-7

Hide quick links:

Advertisement

loading