Removing The Gripper Motor (M7) - Canon Staple Finisher-H1 Service Manual

4
Parts Replacement and Cleaning Procedure > Motors > Removing the Gripper Motor (M7)

Removing the Gripper Motor (M7)

1) Remove the lower 2) Pull out the tray auxiliary guide until it stops.
processing tray unit.
(Refer to page 4-15)
3) Remove the 3 screws and the belt, and disconnect the 2 connectors, and then remove the
gripper motor along with the support plate.
x3
x2
4 Parts Replacement and Cleaning Procedure > Motors > Removing the Gripper Motor (M7)
F-4-41
4) Remove the 2 screws, and then remove the gripper motor.
x2
F-4-42
F-4-43
4-20
4-20